There are bits of aluminum in various forms from chunks to channels. We used a blow torch, wire brush, 600 grit wet sand and razor blade to get it off.
What I can't remove I'll have a machinist do.
16.4.12
CB 750 Crank shaft cleanup_MF
As I mentioned the main bearing melting onto my crankshaft was the cause of the seizure so today we polished and scraped away aluminum from the lobe.
There are bits of aluminum in various forms from chunks to channels. We used a blow torch, wire brush, 600 grit wet sand and razor blade to get it off.
What I can't remove I'll have a machinist do.
There are bits of aluminum in various forms from chunks to channels. We used a blow torch, wire brush, 600 grit wet sand and razor blade to get it off.
What I can't remove I'll have a machinist do.